Non-Ferrous Metals Saw Blades

 

Tooth: T.C.G.
pg76a.gif (12190 bytes)

To cut extrusion tubes, sheets and light bars.

Please Note:
Material to be cut must be clamped firmly.  Fluid cooling is necessary.
DIAMETER (INCHES) KERF BORE (INCHES) TEETH PART NO.
7 .112 5/8 44 L1A-180
8 .112 5/8 48 L1A-200
9 .112 5/8 60 L1A-225
10 .115 5/8 60 L1A-250
12 .120 5/8 80 L1A-308
12 .120 1 80 L1A-300
14 .145 1 90 L1A-350
16 .145 1 100 L1A-400
18 .175 1 100 L1A-450
20 .175 1 100 L1A-500

trlin3.gif (2792 bytes)

Non-Ferrous Metals Saw Blades

pg76b.gif (19612 bytes)
DIAMETER (INCHES) KERF BORE (INCHES) TEETH GRIND PART #
8 .112 5/8 60 TCG L1B-200
10 .115 5/8 80 TCG L1B-250
12 .120 5/8 100 TCG **L1B-308
12 .120 1 100 TCG L1B-300
14 .145 1 100 TCG L1B-350
15 .145 1 100 TCG L1B-380
16 .145 1 120 TCG L1B-400
20 .175 1 120 TCG L1B-500
 

To cut profile aluminum frames.

Please Note:
material to be cut must be clamped firmly.  Fluid cooling is necessary.
10 .118 5/8 72 TCGM L1C-250
12 .125 1 92 TCGM L1C-300

  * For Pistorius Mitre Saw
** For Hitachi Mitre Saw

Complete the following form if you have any questions regarding this product. We'll answer your questions as soon as we can.

Non-Ferrous Metals Saw Blades

Please include your e-mail address so we can reply to your request.
E-mail address (required)

 

To contact us by E-mail regarding products sales@truecut.com
Copyright © 1998
Last modified: October 29, 2003