Plastic and Special Purpose Saw Blades
Plastic Saw Blades
 |
| DIAMETER (INCHES) |
KERF |
BORE (INCHES) |
TEETH |
PART # |
| 8 |
.125 |
5/8 |
60 |
L01200 |
| 10 |
.126 |
5/8 |
80 |
L01250 |
| 12 |
.135 |
1 |
100 |
L01300 |
| 14 |
.150 |
1 |
100 |
L01350 |
| 16 |
.150 |
1 |
120 |
L01400 |
| 18 |
.175 |
1 |
120 |
L01450 |
|
"T.C.2" grind recommended for extra fine chiples sawing on acrylics and
formicas or melamine where a scoring saw cannot be used.
Special Purpose Saw Blades
|
This blade is specially designed for the plastic working industry,
recommended for cutting single or multiple stacked sheets of plastic, where melting or
chipping can be a problem. This non-melting blade is particularly suitable for
cutting acrylics, selrins ABS (cycolac), styrenes, PVC. |
 |
| DIAMETER (INCHES) |
KERF |
BORE (INCHES) |
TEETH |
PART # |
| 10 |
.100 |
5/8 |
80 |
LNM250 |
| 12 |
.125 |
1 |
100 |
LNM300 |
| 14 |
.145 |
1 |
100 |
LNM350 |
|
Tooth: T.C.H. (Face Hollow-Ground)
 |
DIAMETER
mm (inch) |
KERF
mm (inch) |
BORE
mm (inch) |
TEETH |
PART # |
| 200 (7 7/8) |
2.9 (.115) |
30 (5/8) |
48 |
L41200 |
| 250 (9 7/8) |
2.9 (.115) |
30 (5/8) |
60 |
L41250 |
| 300(11 7/8) |
2.9 (.115) |
30 (1) |
72 |
L41300 |
| 350(13 3/4) |
2.9 (.115) |
30 (1) |
84 |
L41350 |
|
|
This saw with hollow-ground tooth face and T.C.G. top is specially
recommended for clean cutting of single boards (up to 22mm thickness) overlaid with
synthetic resins (thermoplastics, duroplastics and polyesters). |
Complete the following form if you have any questions regarding this
product. We'll answer your questions as soon as we can.
|