Thin Kerf and Thin Rim Saw Blades

Thin Kerf Saw Blades

pg71a.gif (12050 bytes)
A thinner blade for fine woods and expensive sheets.

The diameter of the flanges for this saw blade must be at least 1/3" that of diameter of saw blades.

DIAMETER (INCHES)	KERF	BORE (INCHES)	TEETH	GRIND	PART #
6	.080	5/8	48	ATB	L05150
7	.080	5/8	56	ATB	L05180
8	.080	5/8	64	ATB	L05200
10	.083	5/8	80	ATB	L05250
10	.087	5/8	100	ATB	L05251
10	.083	5/8	80	TCG	L05252
12	.087	1	96	ATB	L05300
12	.087	1	96	TCG	L05302
14	.095	1	108	ATB	L05350

Thin Rim Saw Blades

pg71b.gif (18693 bytes)
Built-in collar on one side only.
The thin rim provides minimum kerf at teeth.
L15-Used for finishing cuts with the least possible stock removal.
L16- Specially recommended to cut acrylic sheets, engraving stock, and chippy material.

DIAMETER (INCHES)	KERF	BORE (INCHES)	TEETH	COLLAR WIDTH	PART #
8	.092	5/8	60	2	L15200
9	.092	5/8	60	2	L15225
10	.092	5/8	80	2	L15250
12	.092	1	100	2	L15300
DIAMETER (INCHES)	KERF	BORE (INCHES)	TEETH	COLLAR WIDTH	PART #
8	.092	5/8	60	2	L16200
9	.092	5/8	60	2	L16225
10	.092	5/8	80	2	L16250
12	.092	1	100	2	L16300

Complete the following form if you have any questions regarding this product. We'll answer your questions as soon as we can.