Straight Router Bits
1/4" Shank
Suitable for norman plunge cutting. Available with one or two flutes. Can be used on portable or industrial routers. |
|
| CUTTING DIA. | NUMBER OF FLUTES | CUTTING LENGTH | O.A.L. | PART NO. |
| 1/4" | 1 | 1/2" | 2" | 41408 |
| 1/4" | 1 | 3/4" | 2 1/4" | 41412 |
| 1/4" | 1 | 1" | 2 1/2" | 41416 |
| 1/4" | 1 | 3/4" | 2 3/4" | 41412-A |
| 1/4" | 1 | 1" | 3" | 41416-A |
| 9/32" | 1 | 3/4" | 2 1/4" | 9321412 |
| 5/16" | 1 | 1" | 2 1/2" | 51416 |
| 1/4" | 2 | 1/2" | 2" | 42408 |
| 1/4" | 2 | 3/4" | 2 1/4" | 42412 |
| 1/4" | 2 | 1" | 2 1/2" | 42416 |
| 1/4" | 2 | 1" | 3" | 42416-A |
| 9/32" | 2 | 1" | 3" | 9322416 |
| 5/16" | 2 | 1" | 2 1/2" | 52416 |
| 3/8" | 2 | 3/4" | 2 1/4" | 62412 |
| 3/8" | 2 | 1" | 2 1/2" | 62416 |
| 3/8" | 2 | 1 1/4" | 2 3/4" | 62420 |
| 7/16" | 2 | 1" | 2 1/2" | 72416 |
| 1/2" | 2 | 3/4" | 2 1/4" | 82412 |
| 1/2" | 2 | 1" | 2 1/2" | 82416 |
| 9/16" | 2 | 3/4" | 2 1/8" | 92412 |
| 5/8" | 2 | 3/4" | 2 1/8" | 102412 |
| 11/16" | 2 | 3/4" | 2 1/8" | 112412 |
| 3/4" | 2 | 3/4" | 2 1/8" | 122412 |
| 1" | 2 | 3/4" | 2 1/8" | 162412 |
5/16" Shank
|
|
3/8" Shank
3/8" shank tools should always be used instead of 1/4" shank when possible. 3/8" shank bits are stronger than 1/4" and will allow higher feed rates with less breakage.
|
|
3/4" Shank
|
|
Click here for 1/2" Shank Straight Router Bits
Complete the following form if you have any questions regarding this product. We'll answer your questions as soon as we can.