Standard Carbied Tipped Router Bits
We proudly offer several brands of standard router bits for your convenience.
The following pages show a cross section of what is available.
FOR BEST RESULTS, NOTE:
The Router Bits shown here are all designed for a specific job.
It is very important not to use the tool when it is dull or improperly sharpened. (If the tool is dull or improperly sharpened, the increased feed pressure required will cause breakage).
Loose, worn (ovalized) or dirty sollets account for approximately 80% of tool breakage. Collets must be replaced regularly (marks on shanks will indicate collet trouble and void guarantee). Shank must always be inserted all the way into the collet.
Always use the shortest bit possible. Suspend work and find cause if machine or workpiece vibrates.
- 1/4" Shank Solid Carbide Router Bits.
- 1/4", 5/16" and 3/8" Shank Solid Carbide Straight Router Bits.
- 1/4", 5/16", 3/8" and 3/4" Shank Straight Router Bits.
- 1/2" Shank Straight Router Bits.
- Stagger Tooth Bits.
- Opposite Shear Stagger Tooth Bits.
- Spiral-Flute Router Bits
- Spiral-Flute Flush Trimming Bits
- Mortising Bits
- Panel Pilot Bits
- Rabbeting Bits
- Flush Trimming Bits
- Helix Laminate Trim Bits.
- Chamfer Bits
- "V" Grooving Bits 90 Included Angle
- Dovetail Bits
- Helix Dado Bits
- Cove Bits
- Round Nose Bits.
- Round Over Plunge Bits.
- Rounding Over Bits.
- Thumbnail Bits.
- Half Round Bits.
- Finger Lip Bits
- Beading Bits
- Bull Nosing Bit
- Ogee Bits
- Paneling Bit
- Roman Ogee Bits
- Classical Ogee Bits
- Flat Ogee Bits
- Ogee Fillet Bit type A
- Ogee Fillet Bit type B
- Classic Beading Bit
- Traditional Plunge Bits
- Ogee Plunge Bits type A
- Classical Plunge Bits
- Ogee Plunge Bits type B
- Beading Plunge Bits
- Ogee Raised Panel Bit
- Classical Raised Panel Bit
- Provincial Raised Panel Bit
- Cove Raised Panel Bit
- Door Lip Set For Router
- Glue Joint Router Bit
- Mitre Joint Router Bit
- Finger Pull Bit type A
- Finger Pull Bit type B
- Finger Pull Bit type C
- Finger Pull Bit type D
- Reversible Counter Profile Assembly
- Guiding Panel Bits
- Trim Cutters Assembly
- Slotting Cutters